Xray_bash_onekey/po/cache_English.json

{
  "提醒": "reminder",
  "错误": "error",
  "警告": "warning",
  "未安装": "not installed",
  "日志文件归档失败": "log file archiving failed",
  "清空日志文件失败": "failed to clear the log file",
  "日志文件已轮转并归档为": "the log file has been rotated and archived as",
  "当前系统为": "current system is",
  "不在支持的系统列表内, 安装中断": "not in the list of supported systems, installation interrupted",
  "当前用户是 root 用户, 进入安装流程": "the current user is the root user, entering the installation process",
  "当前用户不是 root 用户, 请切换到 root 用户后重新执行脚本": "the current user is not the root user. please switch to the root user and re-run the script",
  "无法获取远程语言文件信息": "unable to retrieve remote language file information",
  "正在更新语言文件": "updating language files",
  "语言文件更新失败": "language file update failed",
  "语言文件无效": "invalid language file",
  "版本文件更新失败": "failed to update the version file",
  "语言文件更新完成": "language file update completed",
  "正在安装": "installing",
  "安装失败": "installation failed",
  "将使用默认语言": "will use the default language",
  "未找到": "not found",
  "不支持的语言": "unsupported language",
  "发现语言文件更新": "language file update detected",
  "完成": "complete",
  "失败": "failure",
  "在线版本检测失败, 请稍后再试": "online version check failed, please try again later",
  "安装": "installation",
  "已安装": "installed",
  "自启动配置": "auto-start configuration",
  "链接库安装": "library installation",
  "值为空或超出范围, 请重新输入": "the value is empty or out of range, please re-enter",
  "值为空, 请重新输入": "the value is empty, please re-enter",
  "确定端口": "confirm port",
  "请输入端口": "please enter the port",
  "默认值": "default value",
  "请输入 0-65535 之间的值": "please enter a value between 0 and 65535",
  "端口不允许使用, 请重新输入": "the port is not allowed to be used, please re-enter",
  "请选择安装协议": "please select the installation agreement",
  "默认": "default",
  "请输入": "please enter",
  "请输入有效的数字": "please enter a valid number",
  "是否添加简单 ws/gRPC 协议 用于负载均衡": "whether to add simple ws/grpc protocol for load balancing",
  "如不清楚具体用途, 请勿选择": "if the specific purpose is unclear, please do not select",
  "已跳过添加简单 ws/gRPC 协议": "skipping adding simple ws/grpc protocol",
  "是否需要自定义": "whether customization is needed",
  "请输入自定义": "please enter custom",
  "请勿与其他端口相同": "please do not use the same port as others",
  "是否需要设置防火墙": "whether a firewall needs to be set up",
  "防火墙": "firewall",
  "重启完成": "restart completed",
  "开放防火墙相关端口": "open the firewall for related ports",
  "若修改配置, 请注意关闭防火墙相关端口": "if modifying the configuration, please remember to close the firewall-related ports",
  "配置": "configuration",
  "跳过防火墙设置": "skip firewall settings",
  "伪装路径": "camouflage path",
  "不需要": "not needed",
  "是否需要修改": "whether modification is needed",
  "用户名": "username",
  "请输入正确的 email": "please enter the correct email",
  "是否需要自定义字符串映射": "whether custom string mapping is needed",
  "请输入自定义字符串": "please enter a custom string",
  "最多30字符": "up to 30 characters",
  "自定义字符串": "custom string",
  "映射字符串": "mapping string",
  "检测到 target 域名已配置, 是否保留": "target domain name has been configured, do you want to keep it",
  "请输入一个域名": "please enter a domain name",
  "域名要求支持 TLSv1.3、X25519 与 H2 以及域名非跳转用": "domain names must support tlsv1.3, x25519, and h2, and should not use redirection",
  "确认域名符合要求后请输入": "after confirming that the domain name meets the requirements, please enter",
  "正在检测域名请等待": "checking domain name, please wait",
  "该域名不支持": "this domain name is not supported",
  "该域名发生了跳转": "the domain name has been redirected",
  "该域名可能不满足所有要求": "this domain name may not meet all requirements",
  "是否仍要设置此域名": "do you still want to set this domain name",
  "域名": "domain name",
  "满足所有要求": "meet all requirements",
  "域名的": "of the domain name",
  "默认为": "default is",
  "域名本身": "the domain name itself",
  "如不清楚具体用途, 请勿继续": "if you are unsure of the specific purpose, please do not proceed",
  "是否变更": "whether to change",
  "负载均衡": "load balancing",
  "请选择协议为 ws 或 gRPC": "please select the protocol as ws or grpc",
  "返回": "return",
  "请重新输入正确的数字": "please re-enter the correct number",
  "本地文件 file_manager.sh 不存在, 正在下载": "the local file file_manager.sh does not exist, downloading now",
  "下载失败, 请手动下载并安装新版本": "download failed, please manually download and install the new version",
  "当前模式不支持此操作": "the current mode does not support this operation",
  "配置用途可以参考文章": "for configuration purposes, please refer to the article",
  "修改": "modify",
  "端口": "port",
  "不支持": "not supported",
  "用户名修改": "username modification",
  "请先删除多余的用户": "please delete the extra users first",
  "配置修改": "configuration modification",
  "检测到 Xray 的权限控制, 启动修改程序": "xray permission control detected, starting modification program",
  "修改完成": "modification completed",
  "若更新无效, 建议直接卸载再安装": "if the update is ineffective, it is recommended to uninstall and then reinstall",
  "部分新功能需要重新安装才可生效": "some new features require reinstallation to take effect",
  "检测到存在最新版": "a newer version has been detected",
  "脚本可能未兼容此版本": "the script may not be compatible with this version",
  "是否更新": "whether to update",
  "升级": "upgrade",
  "启动失败": "startup failed",
  "是否回滚到之前的版本": "whether to roll back to the previous version",
  "未执行回滚操作": "rollback operation not executed",
  "正在回滚": "rolling back",
  "已成功回滚到之前的": "successfully rolled back to the previous",
  "版本": "version",
  "回滚失败": "rollback failed",
  "重装": "reinstall",
  "Reality 协议有流量偷跑的风险": "reality protocol has the risk of traffic leakage",
  "已跳过安装": "installation skipped",
  "已存在, 跳过编译安装过程": "already exists, skip the compilation and installation process",
  "检测到旧版本安装的": "detected an old version installed",
  "请先做好备份": "please make a backup first",
  "是否需要删除 (请删除)": "whether to delete (please delete)",
  "已跳过删除": "already skipped deletion",
  "日志目录已更改, 日志清除需要重新设置": "the log directory has been changed, and log clearing needs to be reset",
  "检测到其他套件安装的 Nginx, 继续安装会造成冲突, 请处理后安装": "other nginx packages installed have been detected. continuing the installation will cause conflicts. please resolve this issue before proceeding with the installation",
  "即将下载已编译的": "about to download the compiled",
  "不支持的系统架构": "unsupported system architecture",
  "配置文件不完整, 退出升级": "configuration file is incomplete, exiting upgrade",
  "当前安装模式不需要": "the current installation mode is not required",
  "配置文件不存在, 退出升级": "configuration file does not exist, exit upgrade",
  "备份旧版": "backup old version",
  "删除旧版": "delete old version",
  "是否保留原 Nginx 配置文件": "whether to keep the original nginx configuration file",
  "原配置文件已删除": "the original configuration file has been deleted",
  "原配置文件已保留": "the original configuration file has been retained",
  "删除": "delete",
  "备份": "backup",
  "已为最新版": "already updated to the latest version",
  "设置后台定时自动更新程序 (包含: 脚本/Xray/Nginx)": "set up a background scheduled automatic update program (including: script/xray/nginx)",
  "可能自动更新后有兼容问题, 谨慎开启": "there may be compatibility issues after automatic updates; proceed with caution",
  "是否开启": "whether to enable",
  "设置自动更新": "set automatic update",
  "已设置自动更新": "auto-update has been set",
  "是否关闭": "whether to close",
  "删除自动更新": "delete automatic update",
  "安装 SSL 证书生成脚本依赖": "install ssl certificate generation script dependencies",
  "安装 SSL 证书生成脚本": "install ssl certificate generation script",
  "检测到原域名配置存在, 是否跳过域名设置": "detected existing original domain configuration, do you want to skip domain settings",
  "无法获取公网IP地址": "unable to obtain public ip address",
  "安装终止": "installation terminated",
  "已跳过域名设置": "domain setting skipped",
  "确定域名信息": "confirm domain name information",
  "请输入你的域名信息": "please enter your domain name information",
  "请选择公网IP(IPv4/IPv6)或手动输入域名": "please select a public ip (ipv4/ipv6) or manually enter a domain name",
  "正在获取公网IP信息, 请耐心等待": "retrieving public ip information, please wait patiently",
  "此选项用于服务器商仅提供域名访问服务器": "this option is used when the server provider only provides domain name access to the server",
  "注意服务器商域名添加 CNAME 记录": "note: add a cname record for the server provider's domain",
  "域名DNS解析IP": "domain name dns resolution ip",
  "公网IP/域名": "public ip/domain name",
  "域名DNS解析IP与公网IP匹配": "domain name dns resolves ip matches public ip",
  "请确保域名添加了正确的 A/AAAA 记录, 否则将无法正常使用 Xray": "please make sure the domain has added the correct a/aaaa record; otherwise, xray will not function properly",
  "域名DNS解析IP与公网IP不匹配, 请选择": "the domain name's dns resolution ip does not match the public ip. please select",
  "继续安装": "continue installation",
  "重新输入": "re-enter",
  "终止安装": "cancel installation",
  "检测到原IP配置存在, 是否跳过IP设置": "original ip configuration detected. skip ip setting",
  "已跳过IP设置": "ip setting skipped",
  "确定公网IP信息": "confirm public ip information",
  "请选择公网IP为IPv4或IPv6": "please select public ip as ipv4 or ipv6",
  "手动输入": "manual input",
  "端口未被占用": "the port is not in use",
  "检测到": "detected",
  "端口被占用": "port is occupied",
  "以下为": "the following is",
  "端口占用信息": "port occupation information",
  "尝试终止占用的进程": "attempt to terminate the occupied process",
  "证书测试签发成功, 开始正式签发": "certificate test issuance successful, starting official issuance",
  "证书测试签发失败": "certificate test issuance failed",
  "证书生成成功": "certificate generated successfully",
  "证书配置成功": "certificate configured successfully",
  "证书生成失败": "certificate generation failed",
  "检测到 Xray 配置过多用户": "detected that xray is configured with too many users",
  "是否保留原 Xray 配置文件": "keep the original xray configuration file",
  "添加简单 ws/gRPC 协议": "add simple ws/grpc protocol",
  "检测到配置文件, 是否读取配置文件": "configuration file detected. do you want to read the configuration file",
  "已删除配置文件": "configuration file deleted",
  "已保留配置文件": "configuration file has been retained",
  "检测到当前安装模式与配置文件的安装模式不一致": "detected that the current installation mode is inconsistent with the installation mode in the configuration file",
  "是否保留配置文件 (强烈不建议)": "keep configuration file (strongly not recommended)",
  "请务必确保配置文件正确": "please make sure the configuration file is correct",
  "检测到配置文件不完整, 是否保留配置文件": "incomplete configuration file detected. do you want to keep the configuration file",
  "配置删除": "configuration deletion",
  "设置 Nginx 开机自启": "set nginx to start automatically on boot",
  "设置": "settings",
  "开机自启": "startup on boot",
  "关闭 Nginx 开机自启": "disable nginx from starting automatically on boot",
  "关闭": "close",
  "停止已有服务": "stop existing service",
  "重启": "restart",
  "启动": "start",
  "停止": "stop",
  "新版本已自动设置证书自动更新": "the new version has automatically set up certificate auto-updating",
  "老版本请及时删除 废弃的 改版证书自动更新": "please delete the old version in a timely manner. the obsolete certificate will be automatically updated after the revision",
  "已设置改版证书自动更新": "the certificate renewal has been set to update automatically",
  "是否需要删除改版证书自动更新 (请删除)": "whether to delete the certificate auto-update for the revised version (please delete)",
  "删除改版证书自动更新": "delete version certificate automatic update",
  "已过期": "expired",
  "证书生成日期": "certificate generation date",
  "证书生成天数": "number of days for certificate generation",
  "证书剩余天数": "remaining days of certificate",
  "是否立即更新证书": "whether to update the certificate immediately",
  "证书签发工具不存在, 请确认是否证书为脚本签发": "the certificate issuance tool does not exist. please confirm whether the certificate was issued by a script",
  "证书更新": "certificate update",
  "本地文件 fail2ban_manager.sh 不存在, 正在下载": "the local file fail2ban_manager.sh does not exist, downloading",
  "检测到日志文件大小如下:": "the log file size is detected as follows",
  "即将清除": "about to clear",
  "日志清理": "log cleanup",
  "已设置旧版自动清理日志任务": "the old version automatic log cleanup task has been set",
  "是否需要删除旧版自动清理日志任务": "do you need to delete the old version of the automatic log cleanup task",
  "保留现有自动清理日志任务": "retain the existing automatic log cleanup task",
  "删除旧版自动清理日志任务": "delete the old version of the automatic log cleanup task",
  "是否需要设置自动清理日志": "whether to set automatic log cleanup",
  "清空屏幕": "clear the screen",
  "将在 每周三 04:00 自动清空日志": "logs will be automatically cleared every wednesday at 04:00",
  "已设置自动清理日志任务": "automatic log cleanup task has been set",
  "是否需要删除现有自动清理日志任务": "do you need to delete the existing automatic log cleanup task",
  "删除自动清理日志任务": "delete automatic log cleanup task",
  "设置自动清理日志": "set up automatic log cleanup",
  "配置分享": "configuration sharing",
  "分享链接": "share link",
  "二维码": "qr code",
  "生成分享链接": "generate share link",
  "安装成功": "installation successful",
  "目前分享链接规范为实验阶段, 请自行判断是否适用": "currently, the sharing link specification is in the experimental phase; please determine its applicability on your own",
  "配置信息": "configuration information",
  "主机": "host",
  "用户id": "user id",
  "加密": "encryption",
  "传输协议": "transmission protocol",
  "底层传输安全": "underlying transmission security",
  "路径": "path",
  "不要落下": "don't fall behind",
  "不需要加": "no need to add",
  "流控": "flow control",
  "即将申请证书, 支持使用自定义证书": "certificate will be applied soon, supporting the use of custom certificates",
  "如需使用自定义证书, 请按如下步骤:": "if you need to use a custom certificate, please follow the steps below",
  "1. 将证书文件重命名: 私钥(xray.key)、证书(xray.crt)": "1. rename the certificate files: private key (xray.key), certificate (xray.crt)",
  "2. 将重命名后的证书文件放入": "2. place the renamed certificate file into",
  "目录后再运行脚本": "run the script after the directory",
  "3. 重新运行脚本": "3. re-run the script",
  "是否继续": "whether to continue",
  "所有证书文件均已存在, 是否保留": "all certificate files already exist, do you want to keep them",
  "已删除": "deleted",
  "证书应用": "certificate application",
  "证书文件已存在, 是否保留": "the certificate file already exists, do you want to keep it",
  "证书签发残留文件已存在, 是否保留": "the certificate issuance residual file already exists, do you want to keep it",
  "添加": "add",
  "请选择支持的 TLS 版本": "please select the supported tls version",
  "建议选择 TLS1.3 only (安全模式)": "it is recommended to select tls 1.3 only (secure mode)",
  "兼容模式": "compatibility mode",
  "安全模式": "safe mode",
  "由于 h3 仅支持 TLS1.3, 只支持 TLS1.3 only (安全模式)": "since h3 only supports tls 1.3, it only supports tls 1.3 (secure mode)",
  "已切换至": "already switched to",
  "Nginx/配置文件不存在 或 当前模式不支持": "nginx/configuration file does not exist or current mode is not supported",
  "请先安装": "please install first",
  "此模式不支持修改": "this mode does not support modification",
  "即将显示用户, 一次仅能显示一个": "users will be displayed soon, only one user can be displayed at a time",
  "请选择显示用户使用的协议": "please select the protocol used by the user to display",
  "请选择要显示的用户编号": "please select the user number to display",
  "选择错误": "selecting incorrectly",
  "请直接在主菜单选择 [查看 Xray 配置信息] 显示主用户": "please directly select [view xray configuration information] in the main menu to display the primary user",
  "请先检测 Xray 是否正确安装": "please first check if xray is installed correctly",
  "是否继续显示用户": "whether to continue displaying the user",
  "此模式不支持删除用户": "this mode does not support deleting users",
  "即将添加用户, 一次仅能添加一个": "adding users is coming soon, but only one user can be added at a time",
  "请选择添加用户使用的协议": "please select the protocol used for adding users",
  "添加用户": "add user",
  "是否继续添加用户": "whether to continue adding users",
  "此模式不支持添加用户": "this mode does not support adding users",
  "即将删除用户, 一次仅能删除一个": "deleting user, only one at a time",
  "请选择删除用户使用的协议": "please select the agreement used by the deleted user",
  "请选择要删除的用户编号": "please select the user number to delete",
  "主用户无法删除": "the main user cannot be deleted",
  "删除用户": "delete user",
  "是否继续删除用户": "whether to continue deleting the user",
  "文件不存在": "the file does not exist",
  "已配置 Xray 流量统计": "xray traffic statistics have been configured",
  "是否需要关闭此功能": "do you need to disable this feature",
  "关闭 Xray 流量统计": "disable xray traffic statistics",
  "流量统计需要使用": "traffic statistics need to be used",
  "可能会影响 Xray 性能": "may affect x-ray performance",
  "设置 Xray 流量统计": "set up xray traffic statistics",
  "已卸载": "uninstalled",
  "是否卸载": "whether to uninstall",
  "是否删除所有脚本文件": "delete all script files",
  "已删除所有文件": "all files have been deleted",
  "ヾ(￣▽￣) 拜拜~": "(￣▽￣)ノ bye bye~",
  "已保留脚本文件 (包含 SSL 证书等)": "script file has been retained (including ssl certificate, etc.)",
  "是否保留配置文件": "whether to keep the configuration file",
  "已清空证书遗留文件": "certificate residual files have been cleared",
  "秒后": "seconds later",
  "检测最新版本失败": "failed to detect the latest version",
  "新版本": "new version",
  "更新内容": "update content",
  "存在新版本, 但版本变化较大, 可能存在不兼容情况, 是否更新": "a new version is available, but the version change is significant and may cause compatibility issues. do you want to update",
  "存在新版本, 是否更新": "new version exists, update",
  "检测 脚本 最新版本失败": "failed to detect the latest version of the script",
  "脚本 版本差别过大, 跳过更新": "script version difference is too large, skipping update",
  "更新完成": "update completed",
  "脚本版本变化较大, 若服务无法正常运行请卸载后重装": "the script version has changed significantly. if the service cannot run properly, please uninstall and reinstall it",
  "当前版本为最新版本": "the current version is the latest version",
  "下载最新脚本": "download the latest script",
  "该选项暂时无法使用": "this option is temporarily unavailable",
  "此模式推荐用于负载均衡, 一般情况不推荐使用, 是否安装": "this mode is recommended for load balancing; it is generally not recommended for use. do you want to install",
  "变更": "change",
  "负载均衡配置": "load balancing configuration",
  "清除日志文件": "clear log files",
  "查看证书状态": "view certificate status",
  "更新证书有效期": "update certificate expiration date",
  "设置证书自动更新": "set certificate auto-update",
  "设置 Fail2ban 防暴力破解": "set up fail2ban to prevent brute-force attacks",
  "显示帮助": "show help",
  "更新": "update",
  "脚本卸载": "script uninstallation",
  "显示安装信息": "show installation information",
  "加速": "accelerate",
  "升级脚本": "upgrade script",
  "显示": "display",
  "访问信息": "access information",
  "错误信息": "error message",
  "脚本版本变化较大, 可能存在不兼容情况, 是否继续使用": "the script version has changed significantly, and there may be compatibility issues. do you want to continue using it",
  "检测失败": "detection failed",
  "有新版": "there is a new version",
  "最新版": "latest version",
  "版本未知": "version unknown",
  "运行中": "running",
  "无需测试": "no testing required",
  "未运行": "not running",
  "无法连通": "unable to connect",
  "本地正常": "locally normal",
  "脚本维护中.. 请稍后再试": "script is under maintenance. please try again later",
  "无法检测所需依赖的在线版本, 请稍后再试": "the required online version of the dependency cannot be detected. please try again later",
  "请输入数字": "please enter a number",
  "请输入 1 到 6 之间的有效数字": "please enter a valid number between 1 and 6",
  "无效的选择": "invalid selection",
  "请输入备份名称": "please enter the backup name",
  "不需要后缀": "no suffix needed",
  "报错信息": "error message",
  "备份完整性可能受到影响, 请检查上述错误信息": "backup integrity may be affected. please check the error messages above",
  "备份失败": "backup failed",
  "备份成功": "backup successful",
  "请确保备份文件在目录": "please ensure the backup file is in the directory",
  "没有找到备份文件": "backup file not found",
  "发现多个备份文件": "found multiple backup files",
  "将使用最新的文件进行恢复": "the latest file will be used for recovery",
  "找到最新备份文件": "find the latest backup file",
  "恢复备份": "restore backup",
  "恢复成功": "recovery successful",
  "记得安装": "remember to install",
  "恢复失败": "recovery failed",
  "检测存在到": "detection exists to",
  "来源于自动清理日志错误的设置": "derived from the settings for automatic log cleanup errors",
  "开始修复": "start repairing",
  "错误的配置文件删除": "incorrect configuration file deletion",
  "即将重新设置自动清理日志": "automatically clearing logs will be reset soon",
  "安装管理脚本": "install management script",
  "作者": "author",
  "当前模式": "current mode",
  "当前语言": "current language",
  "可以使用": "can be used",
  "命令管理脚本": "command management script",
  "版本检测": "version detection",
  "脚本": "script",
  "运行状态": "running status",
  "连通性": "connectivity",
  "升级向导": "upgrade wizard",
  "安装向导": "installation wizard",
  "配置变更": "configuration change",
  "用户管理": "user management",
  "查看": "view",
  "用户": "user",
  "查看信息": "view information",
  "实时访问日志": "real-time access log",
  "实时错误日志": "real-time error log",
  "服务相关": "service-related",
  "所有服务": "all services",
  "证书相关": "certificate-related",
  "证书状态": "certificate status",
  "证书有效期": "certificate validity period",
  "证书自动更新": "certificate auto update",
  "其他选项": "other options",
  "自动更新": "automatic update",
  "防暴力破解": "anti-brute force",
  "流量统计": "traffic statistics",
  "清除": "clear",
  "日志文件": "log file",
  "测试": "test",
  "服务器网速": "server network speed",
  "备份恢复": "backup and restore",
  "全部文件": "all files",
  "恢复": "recovery",
  "卸载向导": "uninstall wizard",
  "卸载": "uninstall",
  "清空": "empty",
  "证书文件": "certificate file",
  "退出": "exit",
  "请输入选项": "please enter an option",
  "请输入 0 到 36 之间的有效数字": "please enter a valid number between 0 and 36",
  "不建议": "not recommended",
  "频繁升级 Nginx, 请确认 Nginx 有升级的必要": "frequent upgrades of nginx. please confirm whether an upgrade of nginx is necessary",
  "开始升级": "start upgrading",
  "回到菜单": "back to menu",
  "请输入正确的数字": "please enter the correct number",
  "用于防止暴力破解": "used to prevent brute-force attacks",
  "主菜单": "main menu",
  "管理": "management",
  "状态": "status",
  "请选择一个选项": "please select an option",
  "无效的选择请重试": "invalid selection, please try again",
  "已经安装, 跳过安装步骤": "already installed, skip the installation step",
  "未安装, 请先安装": "not installed, please install first",
  "是否要启用": "whether to enable",
  "规则": "rule",
  "跳过启用": "skip activation",
  "已启用": "enabled",
  "请选择": "please select",
  "操作": "operation",
  "添加自定义规则": "add custom rule",
  "请输入新的": "please enter the new one",
  "名称": "name",
  "请输入日志路径": "please enter the log path",
  "请输入最大重试次数": "please enter the maximum number of retries",
  "最大重试次数必须在 1 到 99 之间": "the maximum number of retries must be between 1 and 99",
  "请输入封禁时间": "please enter the ban time",
  "秒": "second",
  "封禁时间必须在 1 到 8640000 秒之间": "the ban duration must be between 1 and 8,640,000 seconds",
  "已存在": "already exists",
  "自定义规则添加成功": "custom rule added successfully",
  "重启以应用新规则": "restart to apply new rules",
  "停止成功": "stopped successfully",
  "总体状态": "overall status",
  "默认启用的 Jail 状态": "default enabled jail status",
  "封锁情况": "lockdown situation",
  "新版本可用": "new version available",
  "当前版本": "current version",
  "请访问": "please visit",
  "查看更新说明": "view update notes",
  "是否要下载并安装新版本": "do you want to download and install the new version",
  "正在下载新版本": "downloading the new version",
  "下载完成, 请重新运行脚本": "download completed, please run the script again",
  "跳过更新": "skip update",
  "当前已经是最新版本": "it is already the latest version",
  "用法": "usage",
  "文件扩展名": "file extension",
  "目录路径": "directory path",
  "目录": "table of contents",
  "不存在, 请检查路径": "does not exist, please check the path",
  "列出所有": "list all",
  "文件": "file",
  "没有找到": "not found",
  "文件名": "file name",
  "序号": "serial number",
  "请输入网址 (例如 hey.run)": "please enter the url (e.g., hey.run)",
  "不要包含 http:// 或 https:// 开头": "do not include http:// or https:// at the beginning",
  "网址不能包含 http:// 或 https:// 开头": "the url cannot start with http:// or https://",
  "已创建": "created",
  "请输入主机": "please enter the host",
  "请输入权重": "please enter the weight",
  "追加完成": "additional completion",
  "请输入要编辑的文件编号": "please enter the file number to edit",
  "未安装, 正在尝试安装": "not installed, attempting to install",
  "已编辑": "edited",
  "请输入要删除的文件编号": "please enter the file number to delete",
  "不支持的文件扩展名": "unsupported file extension",
  "创建一个新的": "create a new",
  "编辑一个已存在的": "edit an existing",
  "删除一个已存在的": "delete an existing",
  "无效选项, 请重试": "invalid option, please try again",
  "重启成功": "restart successful",
  "重启失败": "restart failed",
  "请检查配置文件是否有误": "please check if there is an error in the configuration file",
  "未启用或配置异常": "not enabled or configuration exception",
  "systemd 未能读取 SSH 日志": "systemd failed to read ssh logs",
  "是否添加 Reality 负载均衡": "whether to add reality load balancing",
  "使用此功能前，建议先阅读作者教程": "before using this feature, it is recommended to first read the author's tutorial",
  "已开启": "already activated",
  "已跳过": "skipped",
  "如用作 Reality 负载均衡二级服务器则无需安装": "if used as a secondary server for reality load balancing, installation is not required",
  "是否额外安装 nginx 前置保护": "whether to additionally install nginx as a front-end protection",
  "推荐": "recommend",
  "检测到已开启 Reality 负载均衡": "reality load balancing has been detected as enabled",
  "如用作 Reality 负载均衡主服务器必须安装": "if used as a reality load balancing master server, it must be installed",
  "检测到已安装": "installed detected",
  "已取消卸载": "uninstallation canceled",
  "下载失败": "download failed",
  "下载成功": "download successful",
  "解压失败": "decompression failed"
}